New firmware is available for the DR590W Series (version 1.005) and DR590 Series (version 1.007) dashcams. This update is especially recommended if you are using Parking Mode and scheduled reboot.
MODELS CONCERNED:
DR590W Series (DR590W-1CH, DR590W-2CH, DR590W-2CH IR) DR590 Series (DR590-1CH, DR590-2CH, DR590-2CH IR) WHAT’S NEW: DR590W Series Version 1.005: Repeated scheduled reboot fix: When the RTC (Real-Time Clock) time was out of sync with the CPU (system) clock, the scheduled reboot could occur more than once. This fix ensures that the scheduled reboot only occurs once every 24 hours. ※ Compatible software version: BlackVue App: Android v3.02 / iOS v3.01 and up. BlackVue Viewer: Windows v2.13 / Mac v1.37 and up. DR590 Series Version 1.007: Repeated scheduled reboot fix: When the RTC (Real-Time Clock) time was out of sync with the CPU (system) clock, the scheduled reboot could occur more than once. This fix ensures that the scheduled reboot only occurs once every 24 hours. ※ Compatible software version: BlackVue Viewer: Windows v2.13 / Mac v1.37 and up. Important: Make sure to use the latest versions of the BlackVue Viewer and App for full compatibility when installing a new firmware version. How to upgrade: Go to the DOWNLOADS page to access the latest firmware and installation instructions. You can also use the BlackVue App (DR590W Series) to download the firmware to your mobile device and do a Firmware Over-The-Air upgrade via the BLACKVUE WI-FI menu. Tip: make sure to download the firmware before you connect to your BlackVue in Wi-Fi (since the BlackVue won’t give you the internet connection necessary to download the firmware). If you are already connected to your BlackVue, then disconnect first, download the firwmare, then connect to the BlackVue’s Wi-Fi again.
<< To previous post What is Wi-Fi password for BlackVue dashcam?
>> To next post Driving from Singapore to London caught on BlackVue (part 1) • To all Recent Posts
0 Comments
Your comment will be posted after it is approved.
Leave a Reply. |
