Shape Divider - Style clouds

CELLINK BATTERIES

The World's First Dashcam Battery


Reliable Power for Extended Parking Mode Since 2013

The SMARTER and SAFER way to power your dashcam while you're away.​
Experience BlackVue Parking Mode with greater peace of mind using the latest Cellink batteries, compatible with modern vehicles, including EVs. Designed with advanced LiFePO4 (Lithium Iron Phosphate) battery technology, Cellink delivers safer, more reliable power for extended Parking Mode recording with ultra-fast charging.

Discover smarter battery management with the flagship Cellink NEO 80+S, featuring connected app support and real-time battery monitoring from your smartphone.
Section divider type: triangleAsym -- position: top

Why Choose a Cellink Battery for Your Dashcam?

EXTENDED PARKING MODE
Enjoy longer Parking Mode recording without relying on your vehicle's starter battery. By powering the dashcam from a dedicated battery system, Cellink helps protect the vehicle's starter battery while supporting extended Parking Mode recording.
RAPID CHARGING
Combining high-capacity performance with rapid charging technology, the Cellink battery can be fully charged in as little as 60 minutes. Spend less time charging and more time enjoying extended Parking Mode protection.
RELIABLE
Powered by automotive-grade LiFePO4 battery technology with up to 2,000 charge cycles. An intelligent BMS provides high-temperature, over-current and short-circuit protection. Designed and manufactured in Korea.​
VEHICLE-FRIENDLY
Supports installation without altering the vehicle's original electrical system. Compatible with modern vehicles, including EVs.
APPROVED
Trusted by major car agents in Singapore for quality, reliability and performance.

INSURED
​For added peace of mind, Cellink batteries are backed by Product Liability Insurance with worldwide coverage of up to USD 800,000.
Section divider type: triangleAsym -- position: top

AVAILABLE MODELS

  • NEO 80+S

    Smart Connected Power
    • Smart App Connectivity via Bluetooth
    • Slim Low-Profile Design
    • 5V USB 3.0 Output for Accessories
    • 12.8V | 7,800mAh | 99.84Wh
    • Expandable with NEO Extended 7+
    Continuing the success of the best-selling NEO 8+S, the new NEO 80+S combines a high-capacity 7,800mAh battery with a more compact design, featuring an approximately 17.1% smaller footprint than its predecessor. Built-in Bluetooth connectivity, a USB accessory output and expandable capacity deliver smarter battery management and greater installation flexibility.

    Connected

    Column align: middle

    Dashcam batteries are typically installed in hidden locations, making it inconvenient to check their charging status and remaining capacity.

    The Cellink NEO 80+S features built-in Bluetooth and works with the free Cellink NEO Plus app (iOS and Android), allowing you to conveniently monitor battery status from your smartphone.

    During charging, the app displays battery percentage, charging voltage and the estimated time remaining until fully charged.
    When the vehicle is parked, the app estimates the remaining Parking Mode operating time based on the total power consumption of the connected dashcam and any accessories powered through the USB 3.0 output.
    Column align: middle
    • ​​Cellink NEO 80+S Battery x1
    • Input Hardwiring Cable x1
    • Output Hardwiring Cable (3-wires split) x1
    • Fuse Tap Cable with 20A Fuse (Mini) x1
    • ​Velcro Tapes x 2 sets

  • B8

    Compact and Reliable Power
    • 73% More Capacity Than the Previous NEO 5S
    • Compact and Reliable Design
    • Simple Operation
    • 12.8V | 7,800mAh | 99.84Wh
    • Expandable with NEO Extended 7+
    The B8 is designed as a compact and reliable dashcam battery, offering the same 7,800mAh capacity as the NEO 80+S in a simple and practical package. Replacing the previous NEO 5S, it provides 73% more capacity and supports expansion with the NEO Extended 7+ for even longer Parking Mode operation.

    What's included

    Column align: middle
    • ​​Cellink B8 Battery x1
    • Input Hardwiring Cable x1
    • Output Hardwiring Cable (3-wires split) x1
    • Fuse Tap Cable with 20A Fuse (Mini) x1
    • ​Velcro Tapes x2 sets

  • NEO Extended 7+

    Plug-and-Play Expansion Pack
    • Compatible with NEO 80+S, NEO 8+S and B8
    • Instantly Extends Parking Mode Recording Time
    • Multiple Units Can Be Connected for Even Longer Runtime
    • Requires a Compatible Cellink Main Battery
    • 12.8V | 6,800mAh | 87.0Wh
    The NEO Extended 7+ is a plug-and-play expansion battery designed for compatible Cellink main batteries. Each unit adds 6,800mAh of additional capacity to extend Parking Mode recording time, and multiple units can be connected in sequence for even longer runtime.

    What's included

    Column align: middle
    • Cellink NEO Extended 7+ Battery x1
    • Input Cable Link to Cellink NEO x1
    • ​Velcro Tapes x2 sets
    ​

Specifications

• NEO 80+S / B8 / NEO Extended 7+

• POWER DURATION

How does it works?

Column align: middle
​The Cellink Batteries support two charging methods:

• Plug-and-Play Installation
Simply connect the battery to your vehicle's 12V power outlet (cigarette lighter socket) for quick and easy installation.

• Hardwired Installation
For the fastest charging performance, connect the battery directly to the vehicle's fuse box. It also enables a cleaner and more discreet installation, making it the preferred choice for professional installations.

When the vehicle's ignition is ON
The Cellink battery charges while simultaneously supplying power to the dashcam.

When the vehicle's ignition is OFF
The Cellink battery automatically powers the dashcam independently, enabling extended Parking Mode recording without drawing power from the vehicle's starter battery.

Protects Your Vehicle's Starter Battery
Unlike conventional hardwiring solutions that draw power directly from the vehicle's starter battery, the Cellink battery powers the dashcam from its own dedicated battery system. This helps preserve the performance and lifespan of the vehicle's starter battery while supporting extended Parking Mode recording.
Section divider type: waves -- position: top

VIDEOS

Section divider type: waves -- position: bottom
Anchor Element
Copy for linking on the same page:
https://www.blackvue.com.sg/cellink-b-battery?data-scroll-to-anchor=SpecTable
Copy for linking from an external page:
https://www.blackvue.com.sg/cellink-b-battery?data-anchor-link=SpecTable

Intelligent Charging Management

Column align: middle
Both the NEO 80+S and B8 feature selectable charging modes to support different installation methods.

HIGH Mode (7.5A)
  • Optimized for hardwired installations
  • ​Full charge as little as 60 minutes

LOW Mode (5.0A)
  • Ideal for charging via a compatible Cellink charging cigar jack cable
  • Can also be used for hardwired installations with limited current supply
  • Automatically activated when a compatible Cellink charging cigar jack cable is connected

For enhanced safety, the system automatically switches to LOW Mode (5.0A) when a compatible Cellink charging cigar jack cable is detected, ensuring safe and reliable charging through the vehicle's 12V power outlet.

Expandable

Column align: middle
EXPANDABLE CAPACITY FOR EXTENDED PARKING MODE

The Cellink NEO 80+S and B8 support capacity expansion via the compatible NEO Extended 7+ battery. Simply connect the expansion battery using the plug-and-play expansion port to extend Parking Mode recording time.

Each NEO Extended 7+ provides an additional 6,800mAh of capacity, while multiple expansion batteries can be connected for even longer runtime.

Protect your Car Battery for Parking Mode

Column align: middle
Parking Mode requires a reliable power source when the vehicle is not running. While a vehicle's starter battery may seem like a convenient solution, it is not designed for repeated deep-discharge cycles during extended parking.

Frequent discharge and recharge cycles can accelerate battery wear through a process known as sulfation, reducing cranking performance, shortening battery lifespan and increasing the risk of low-voltage warnings or starting issues.

A dedicated dashcam battery such as the Cellink NEO 80+S is designed specifically for Parking Mode operation. It powers the dashcam independently, helping to protect your vehicle's starter battery while providing extended recording coverage when parked.

Learn more >.

Optional Accessories

Enhance installation flexibility and charging convenience with these optional accessories, compatible with all Cellink main batteries.
Cigar Jack Charging Cable
• For charging from the vehicle's 12V power outlet
• 1.5-metre cable length

Learn More
Home Charger
• For charging from a standard AC wall outlet
• 2.5-metre cable length

Learn More

Frequently Asked Questions

1) I have a new car which is under warranty. Can I install the Cellink for my dashcam to enable the parking mode?
Fret not, our Cellink battery can also support charging using the car cigar jack, this is considered external connection for car accessories which will not interfere with the internal wiring of the original car.  Please request to our authorised dealer before installation and optional cigar jack cable is needed. ​
2) I am driving a continental car and I am worried that such installation may cause electrical error. Is it safe?
Cellink battery is a standalone rechargeable battery, it will only be charged while driving and supplies power directly from the Cellink battery to dashcam while in parking mode. This will not cause any error like "Excessive Leakage Current" in BMWs. It is safe and compatible for any car make and model. ​
3) What are the advantages of using Cellink battery than tapping the power from my car battery for parking mode?
1) Cellink is a standalone rechargeable battery which will not interfere with the life and performance of your car battery. 

2) The automotive batteries perform and behave differently to regular lithium ion batteries found in smartphones. Unlike lithium-based batteries, batteries for vehicles last much longer when stored in a charged state. The instability caused by leaving it discharged most of the time while in parking mode will increase the sulfation process, a build-up of lead sulfate crystals.
​A sulfated battery can lead to:
a) Loss of cranking power which leads to risk unable to start the car
b) Longer charging times
c) Shorter running times between charges
d) Dramatically shorter battery life
4) Where will Cellink battery be installed in the car?
Cellink battery is a reliable and maintenance free battery hence need not user intervention. It will be normally hidden from sight , typical location is below the seat, inside the lower part of dashboard or in the boot. ​
5) Since the battery is installed out of sight in the car cabin, how can I check the battery performance?
With the new Cellink Neo 80+S which comes with built-in Bluetooth, you can use your smartphone to check the charging time, usage time and settings wirelessly. ​
6) Can the cable be completely hidden after the installation?
As a default installation method, the charging cable is completely hidden when terminated to the fuse box. 
If you choose to use the cigar jack cable, the cable around the female cigar jack may be exposed. This depends on the location of the cigar jack in your car. ​
7) Is Cellink different from a regular power bank?
Yes indeed! The Cellink Battery is made of Lithium Iron Phosphate cells (LiFePO4). A regular power bank designed as backup batteries for phones and portable electronic devices are usually of the Lithium-ion (Li-ion) or Lithium-polymer (LiPo) type. Those high-density batteries are not suitable for use in a closed parked vehicle as they risk causing fire or explosion. LiFePO4 batteries can sustain more extreme temperatures, more charge cycles and are also more environment-friendly. ​
8) I have a 10,000mAh regular power bank but the size is much smaller than this 6,000mAh Cellink battery. Why is it so?
mAh rating can be misleading if we don’t consider voltage. Tip: think in terms of Watt-hours (Wh). Of course the type of battery should be taken into consideration: high power density batteries have higher capacity for a given volume. In other words, at same capacity, a Li-ion or LiPo battery will always be smaller than a LiFePO4 battery. Still, you should keep in mind that consumer electronics and car accessories assume different voltage values. The milliamp rating of regular power banks is usually based on a voltage of 3.7V. This means for a 10,000 mAh battery, the total capacity is 10,000mAh x 3.7V / 1,000 = 37Wh. By way of comparison, the Cellink NEO 80+S has a capacity of 7,800mAh at 12.8V, which translates into 99.84Wh.
9) Can I bring Cellink battery on a plane?
According to the IATA (International Air Transport Association) spare batteries under 100Wh can be carried on a plane in a carry-on luggage–NOT in checked luggage–like most lithium batteries, without requiring the operator’s approval. It is recommended to check with the airline for confirmation with the following specs:
Spec: 
1) Cellink B8 > 99.84 Wh (Lithium Iron Phosphate / LiFePo4)
2) Cellink NEO 80+S > 99.84 Wh (Lithium Iron Phosphate / LiFePo4)
3) Cellink NEO Extended 7+ > 84.5 Wh (Lithium Iron Phosphate/ LifePo4)
10) How to setup Cellink NEO Extended to NEO?
11) How to setup Cellink NEO 8+?
12) How to setup Cellink NEO Extended to NEO 8+?
13) Can I connect accessories to the USB port of Cellink NEO 8+?
The USB port of the Cellink NEO 8+ can support up to 0.9Ampere of any 5V powered accessories. When you connect any accessories to the USB port, the NEO PLUS App is unable to show accurate "Usable Time" (power duration) since the calculation is only based on the consumption to the dashcam and not including the load to USB port.