 Cellink NEO is the best selling power solutions for dashcams since its released in November 2017 replacing the predecessor model, Cellink B6. Proven reliable and recognised by most car agents in Singapore as the safest way to power the dashcam during parking mode instead of tapping to car battery power. Rev Magazine had gone in-depth to review this product: Every vehicle today has at least one battery. Most of the battery’s energy is used to start the engine and run electrical system such as the lights and air conditioning. It also serves as a voltage stabilizer to reduce spikes in current supply once the alternator takes over the electrical production. Dash cams are the must-have car accessory, be it for driving or keeping an eye out when the car is parked. For example: A Blackvue dash cam would need to tap on the car’s battery to enable the “Parking Mode”. However, frequent discharging of the vehicle’s battery during parking mode will a ect the battery life and performance. There is also a risk that the battery may get too weak to start the vehicle. For vehicles with sensitive electronics, a powerful solution can be had with the new Cellink Neo accessory power battery. Without relying on the car’s battery to operate, the Cellink Neo ensures that the vehicle’s original battery service life is prolonged. The power-dense 76.8Wh LiFePO4 battery technology can power a dash cam for up to 48 hours in parking mode. With a compact aluminium body, the Cellink Neo can installed in a hidden location in the vehicle without worry about heat generation. For those who demand battery information, the Cellink Neo has Bluetooth connectivity and Smartphone App capability built right in, for instant updates about the battery’s status.
With the Cellink app running on a smartphone, owners can check out the charging time, usable time and access to the settings. When wired to the car directly, it can be fully charged in 40 minutes, which is roughly the average commuting time in Singapore! The app is able to show the battery capacity in percentage, battery condition (for charging / discharging state), the time spent on charging / discharging, internal temperature as well as the input / output voltage and current reading. The new Cellink Neo can support a traditional cigar jack power connection should your vehicle require that installation. You can have a peace of mind when using the “Parking Mode” feature without worrying about potential complications. Without needing any connection to the fuse box, this also preserves the new vehicle warranty by local distributors. Using the Cellink Neo in place of a direct vehicle power, can also eliminate the “battery discharge error” warning signals for continental makes and models! |
12/4/2018
1 Comment