Parking Mode has never been easier.
Power your BlackVue dashcam in Parking Mode. Protect your car’s battery.Easy plug and play installation via OBD port.
Low voltage cut-off, timer and Parking Mode switch.
Power your BlackVue dashcam in Parking Mode. Protect your car’s battery.Easy plug and play installation via OBD port.
Low voltage cut-off, timer and Parking Mode switch.
Power your BlackVue in Parking Mode
Power solutions to enable the Parking Mode for BlackVue with Power Magic Pro or Cellink Battery. Rest easy, knowing that your car is being monitored while you are away. BlackVue dashcams automatically switches to Parking Mode to monitor your parked vehicle, but only writes to the memory card when motion or impact detected. |
Taps power from car battery
Power Magic EZ requires power from car battery and connection is plugged to the OBD (On-Board Diagnostic) port. Option to use a standalone rechargeable battery is available here. |
Easily enabling the Parking Mode
Power Magic EZ powers your BlackVue from your vehicle’s OBD* (On-Board Diagnostic) port. Power Magic EZ detects when your car’s ignition is off and maintains power toenable Parking Mode while monitoring your battery’s voltage. When configured voltage level or timer is reached, Power Magic EZ cuts the power to prevent vehicle battery discharge, and resumes when ignition is on again. (*) May not be supported by some electric vehicles. |
Parking Mode Switch
Low Voltage Cut-Off Setting
Timer cut-off setting
Power your BlackVue for a preset duration, from 6 hours to infinity. The timer function is only active when the vehicle’s ignition is off and automatically stops if ignition is on. * Regardless of the timer setting, the power is cut as soon as the voltage drops below the configured voltage cut-off value. |
Spec and more
1) Is Power Magic EZ a battery pack for dashcam?
Power Magic EZ is not a battery pack. It is a hardwire kit which taps the power from your car battery through the OBD (On-board diagnostic port) to enable the parking mode.
Depending on the usage, car battery capacity/ age and driving behaviour of individual driver, it may affect the car battery life and performance.
If you prefer not to use power from car battery, we have option of using Cellink which is a standalone rechargeable battery.
Depending on the usage, car battery capacity/ age and driving behaviour of individual driver, it may affect the car battery life and performance.
If you prefer not to use power from car battery, we have option of using Cellink which is a standalone rechargeable battery.
2) How does the Power Magic EZ functions?
When the voltage of your car battery reaches the set threshold voltage (for example 12.0 or 12.5V), it will automatically cuts off the power to the dashcam to prevent further draining of your car battery. It also has timer control, when the set time had lapsed, it will cut off the power to the dashcam automatically.
3) Where is the Power Magic EZ installed?
Power Magic EZ is directly plugged to the OBD port. Some cars have cover over the OBD port. For this case, you may not able to cover it back once Power Magic EZ is plugged to the OBD port.